Search
- Special Offers
- VoIP Telephones
- ISDN Interfaces
- Headsets
- Conference Solutions
- VoIP PBX
- Gateways
- Analog Adapters
- Switches
- TRex
- IP Door Entry Systems
- Fax-Server
- WLAN + DECT over SIP
- IP Cameras
- Network Accessories
- VoIP Media Gateway voip-mg The Junghanns.NET Voice over IP Media Gateway (voip-mg) turns all...
- Continue
- 42com's Open Source channel driver exclusively allows the combination of the flexible Asterisk-...
- Continue
TOP of the Shop
bero*fix
(57)
Select other categories - bero*fix and:
beroNet offers the berofix card series, a powerful and flexible hardware solution to connect ISDN, GSM and DECT infrastructures to any SIP based VoIP system. It has a modular concept and supports all relevant VoIP technologies like Echo Cancellation, Codec Translation, Secure RTP and FoIP. The card is designed to run on every operating system. It will be installed as a normal network adaptor and every communication to and from the card will be done over ethernet.
Voice Processsing Features:
- Codecs: G.723.1 and Annex A, G.729 a/b, G.726, G.711 u/A
- G.168/G.165 Echo Cancellation with Echo Path Change Detection, up to 128ms
- DTMF Digit Detection
- Voice Activity Detection / Comfort Noise Generation
- Caller ID Generation / Detection
- T.38 fax relay (v.27ter, V.29, and V.17)
- DSS1, EuroISDN conform (feature set: COLP, CFU/CFB, CFNRY, CCBS, ECT, UUS, MCID, CD, CW)
- Q.SIG feature set: CNIP, CNIR, CONP
- Runs on every operating system with every SIP based VoIP solution like Asterisk®, OpenSER, Swyx® or 3CX®
- Modular concept enabling the mix of available technologies (for example E1 and S0)
The berofix base board is available with different channel densities, depending on your usage:
- berofix 400 (4-16 channels)
- berofix 1600 (16-64 channels)
- berofix 6400 (64-120 channels)
Available modules to connect are :
- BF4S0, 4 Port BRI module
- BF1E1, 1 Port PRI module
- BF2E1, 2 Port PRI module
- BF1GSM,1 Port GSM module (available Q4 2009)
- BF2GSM,2 Port GSM module (available Q4 2009)
Additional accessories
- bf4S0Bridge (to use all 4 RJ45 slots on a baseboard with one bf4S0)
- bnTAdapters (to connect 2 BRI Lines on 4 RJ45 slots)
- bnPCM Cable (to interconnect berofix baseboards)
- bnE1Crosscable (to connect berofix E1 ports to other systems)
More informationen about bero*fix here: http://www.berofix.com
BNBF1E1 bero*fix 1E1 PRI Module
The bf1E1 is a PRI/ISDN module for the berofix card series.The bf1E1 module can be configured...
BNBF1600 bero*fix PCI card with max....
The berofix card series is a powerful and flexible hardware solution to connect ISDN (BRI, PRI)...
BNBF4S0 bero*fix 4S0 BRI Module incl....
The bf4S0 Lineinterface is a 4 Port BRI module for the berofix Card series. The bf4S0...
BNBF400e bero*fix PCI express card...
hardware berofix will be detected as a standard Network card by the operating system. Usualy the...
BNBF4S0Bridge to use all 4 RJ45 slots...
BNBF4S0Bridge to use all 4 RJ45 slots on a baseboard with one BF4S0
BNBF400 bero*fix PCI card with max....
The berofix card series is a powerful and flexible hardware solution to connect ISDN (BRI, PRI)...
