- VoIP Telephones
- ISDN Interfaces
- Headsets
- Conference Solutions
- VoIP PBX
- Gateways
- Analog Adaptor ATA
- Switches
- Navayo
- TRex
- IP Door Entry Systems
- Fax-Server
- WLAN + DECT over SIP
- IP Cameras
- Network Accessories
- Special Offers
- With PJP-50USB firmware Version 2.000 it is now possible to chain up to four PJP-50USBs for...
- Continue
- An upgrade to the popular Skype-certified GXV3140, the GXV3175 features a 7” touch screen...
- Continue
- New Fully-Featured 2-line GXP1450 Enterprise SIP Phone Delivers Innovative Desktop...
- Continue
- VoIP Media Gateway voip-mg The Junghanns.NET Voice over IP Media Gateway (voip-mg) turns all...
- Continue
- 42com's Open Source channel driver exclusively allows the combination of the flexible Asterisk-...
- Continue
Sangoma A500BRME Basecard 2 - 24 Port BRI PCIe
Art.No.: VOSANGA500E
- Description
- Accessoires
The Sangoma A500 S/T BRI interface card delivers superior audio quality and scalability. Expand from two to twenty-four ports of BRI with optional telco-grade hardware echo cancellation.
A single PCI or PCI Express slot hosts the connection for up to 24 ports and ensures common synchronous clocking for all channels with no signaling issues. The card is 100% software configurable.
Finally, a BRI card that upholds Sangoma's high standards of quality in engineering and untiring product support.
Architecture
The A500 consists of a Remora™ BRI daughterboard mounted on the AFT PCI card. The Remora™ BRI card has three sockets, each of which can accept an S/T BRI module.
One S/T BRI module has two S/T four wire interfaces, which support TE or NT modes of operation. Changing modes requires no jumpers - simply invert the module.
Up to three additional Remora™ daughterboards can be mounted in empty slot positions beside the A500 assembly. These are connected to the A500 by a special backplane bus connector.
Technical Specifications
- From 2 to 24 ports are supported. Mix TE and NT modes, as required. Changing modes requires no jumpers - simply invert the colour-coded module
- Support for Asterisk®, FreeSwitch™, and Yate as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
- Single synchronous PCI and PCI Express interface for all 24 BRI interfaces
- Six ports per Remora™ card
- Dimensions: 2U Form factor: 187 mm x 55 mm for use in restricted chassis; includes high quality, tested 2 m 8-pin RJ45 port splitter cables and short 2U compatible mounting clips for installation in 2U rackmount servers
- 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
- Autosense compatibility with 5 V and 3.3 V PCI busses
- Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts
- Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available
- Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V
- Temperature range: 0 - 50 °C
- Optimized DMA stream and hardware-level HDLC handling unload the host CPU
- Raw bitstream interfaces can be used to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
- WANPIPE® supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25
Operating Systems
- Linux (all versions, releases and distributions from 1.0 up)
Flash Demo
